Working principle: The geared motor drives the spindle, and the spindle drives the guide material to bend along the guide rail. In the control line, turn the switch as needed and start the motor. After the guiding material bending pipe is operated to the specified position, the power supply is cut off immediately under the action of the stroke switch, the guiding material bending pipe is stopped in the designated discharging positioning groove, and the sealing outer ring and the sealing pressing ring are pressed by the positioning groove. It is tightly sealed on the inner wall of the lower casing to form a sealed state, and then the cutting is started. An ash outlet is provided on the lower casing to discharge dust inside the machine.

Distribute the lifted material to different locations as needed, for example to individual storage bins